1) Window is at least 90”w x 32“h. Windows between booths must align with each other. 2) Modules may have their own floor panels but cannot be attached to current flooring in building (i.e. screws/nails/adhesive cannot be used to attach floor panels to current flooring). 3) Interior walls are constructed from 22-gauge steel and perforated steel. They may be covered in fabric or pyramid foam. 4) Communication panels will be located along the wall between control booth module and rehearsal module and aligned to allow a CAT6 cable (provided by us) to be run between them. 5) There are currently two (2) dedicated 20 AMP circuits reserved for the modules. We will provide an electrician to wire modules from breakers to modules if it is bare wires or a 20 AMP NEMA plug is acceptable to plug into wall receptacle.