good afternoon, the vibration kit will support the UH72A Helicopter. Also, ill extend the by for additional two days.

The vibration measurements are performed during an aircraft ground run, where the engine is run up under specific controlled conditions. Charge Accelerometer Type 8324 is installed on the engine in a predefined position and connected to Hand-held Vibration Analyzer Type 2250-H-100. The vibration analyzer features measurement templates and vibration limits from all SAFRAN HE engine families and will process the vibration measurements according to the maintenance manual instructions of the specific engine type. The vibration measured is automatically compared to the individual limits of the specific engine, and the vibration analyzer will give visual feedback of the status: LEVEL 1, LEVEL 2 or LEVEL 3. The vibration signals and test results are recorded during the test to provide optional post-processing by SAFRAN HE. Detailed test annotation is easily appended by the operator using SAFRAN HE predefined metadata. Engine Vibration Test Kit Type 3656-A includes all the hardware and software needed to perform vibration test procedures in accordance with SAFRAN HE engine maintenance manuals: The heart of the system: Hand-held Vibration Analyzer Type 2250-H-100 that is equipped with SAFRAN HE engine templates (see Table 1) A sensor and conditioning unit: High-temperature Industrial Charge Accelerometer Type 8324 and Cable-integrated Charge to CCLD* Type 2647-D-004 (see Fig. 2). Type 2647-D- 004 is a 10-meter, low-noise, high-temperature cable with an integrated charge-to-CCLD converter specifically customized for demanding engine measurements PC software: Measurement Partner Suite BZ-5503 delivered with Type 2250-H-100, allows archiving and transfer of both measurements and time signals to any Windows®-based computer via a USB interface. Measurement Partner Suite further allows the data to be directly packed and sent by email to the SAFRAN HE Support Centre